Moving Product Using RF

Use the RF Move Product function to relocate product without manually adjusting location quantity.

For example, you need to relocate product to the counter from the overstock location. Display the Move Product screen to move the product. The system updates quantity locations and last count dates in RF Location Maintenance so that you do not need to make any manual adjustments.

You can also view available locations to move product from and move the quantity to multiple locations on the Move Product screen.

Note: If you move product that is assigned a review type from a primary, secondary, or floating location, the product no longer needs to be cycle counted. It is assigned a stock type in its new location and its last count date is updated to the current date. Any product remaining in the original location still needs to be cycle counted and is still assigned a review type. If all product has been moved from the floating location, the system deletes the location.

To move product without manually adjusting location quantity:

Display the Move Product screen by doing one of the following:

On the RF Location Maintenance screen, display the product you want to move, place the cursor on the location from which to move the product, and use the Move hot key.
From the Whse Mgt > RF Applications > Misc menu, select Move Product.

If needed, enter the branch and your user ID in the corresponding fields.

Note: If you access the Move Product screen from the RF Location Maintenance screen, the system populates the above fields. It also displays the product entered on the RF Location Maintenance screen and its unit of measure (UOM) in the selected location.

Scan the product that you want to move.
Scan the location from which you are moving the product. Press F10 to select a location, if necessary.
Enter the quantity that you want to move.

Use the All hot key to select all available quantity in the current location.

Do one of the following to move the product:

Scan the tote onto which you are using to move the product and then use the PutAway hot key to move the product to its new location.

Use the Down Arrow to place the cursor in the PutLoc field. Scan or select the location into which you want to move the product without using a tote. Place the product in the new location to complete the move. The system updates the last count date for the product in the new location.

Note: If the RF Enable Tote Validation control maintenance record is activated, you must scan a tote and use it to move the product instead of placing product directly into the new location.

If you want to split the quantity into multiple locations, use the Qty hot key.

Press Esc to save updates and exit the screen.

To select locations to move the product to and from:

Display the Move Product screen and scan the product you are moving.
Place the cursor in the Location field if you are selecting a move-from location or in the PutLoc field if you are selecting a move-to location.

Press F10 to display the Select Location screen.

The system displays the following information:

Field	Description
Desc	The product name and ID that you are moving.
Location	Each location holding available quantity for the product.
Onhand	The available quantity in the location.
T	The location type, such as stock (S).
S	The location status, such as primary (P).
UM	The UOM in which the quantities are displayed.

Place the cursor on the location that you want to move the quantity from or to and press Enter.

Note: Make sure that you move lot controlled or tagged items to lot controlled or tagged locations.

The system returns you to the Move Product screen so that you can continue moving the product.

Note: You can also select a move-to location on the Non-Directed Put Away screen.

To split quantity that you are moving between multiple locations:

Complete steps 1-5 in the Move Quantity task.
Use the Qty hot key to split the quantity.
At the prompt to enter quantity, enter the quantity that you are placing in the first location.
Either scan the tote onto which you are placing the product or scan the location directly.
Scan the second location into which you are placing the remaining quantity.

Note: Make sure that you move lot controlled or tagged items to lot controlled or tagged locations.

If you need to split the quantity again, use the Qty hot key and repeat the process. The system updates the last count date for the product in the new locations.

Press Esc to save updates and exit the screen.