Receiving Lot Control Product Using RF

If the product you are receiving is lot controlled, ensure it has a lot number and label.

You can assign or scan lot numbers to product during either the receive verify or receive put away process. To assign or scan lot numbers during the receive verify process, the RF Receive Verify Suggest Location Based On Lot Enteredcontrol maintenance record must be set to Y for the branch in which you are receiving. If this control maintenance record is set to Y, the system also suggests a put away location based on the lot number. If this control maintenance record is set to N, you are prompted to scan the lot number during put away and the system does not direct you to a put away location based on the lot number.

To receive verify lot controlled product:

From the Whse Mgt > RF Applications menu, select Recv Verify to display the Recv Verify screen.
After verifying the quantity for the product you are receiving, do one of the following in the Lot field:

If the product has a lot label attached to it, scan the label.
If the product does not have a lot label attached to it, enter a lot number or press F10 to select a number.

Print lot labels and place them on the items in one of the following ways, as needed:

Print labels from the Tote/Lot Label Printing screen for generic lot numbers.
Print labels from the Product Lot Barcode Labels screen for pre-defined lot numbers.
If the system prompts you to enter labels, enter the number of lot labels to print. The system prints the lot labels. Place the lot labels on the item.

Note: For the branch in which you are receive verifying lot controlled items, the Prompt To Print Lot Barcode Labels In RF Receive Verifycontrol maintenance record must be set to Y for the system to prompt you to print lot labels.

Continue receiving the product.