Staging Manifests

With RF manifest staging, the system directs you in staging by displaying each tote for the manifest stop that needs be staged and the location to which you need to stage it.

After you pick a manifest order, use the Order Stage screen to stage the totes holding the orders.

To stage a manifest:

Display the Staging Select screen by doing one of the following:

From the Pick In Process screen, use the Stage hot key.
From the Warehouse Management > RF Applications > RF Main Menu > Misc menu, select Staging.

Note: If prompted, log on to the character-based system. The screen displays manifest stops and non-manifest orders that you have picked. If you access the screen from the Warehouse Management > RF Applications > RF Main Menu > Misc menu, all manifest stops that have been staged but not closed display.

Place the cursor on the manifest you want to stage or scan the tote you want to stage, and press Enter to display the Order Staging screen.

This screen displays the manifest number, customer, ship via, and status of the order in the top section. The tote number used for the order displays below Totes.

Go to the staging location displayed in the Loc field and scan the location's bar code where you are staging the tote.

Note: Staging locations are defined for ship vias on the Branch Shipvia Additional Data screen. Define customer staging locations in Costumer Maintenance.

In the pre-defined package quantity fields, enter the number of corresponding packages on the tote.
You can now either audit the totes or load the truck.

Note: If the RF Tote Status Before Load Truck control maintenance record is set to Audit, you must audit the manifest's totes before loading the truck.

Use the Items hot key to display items picked, as needed.

Press Esc to save updates and exit the screen.